Pumps (continued)
VARCo
The Patriot 300 from VARCo is a ballast-port-cooled, continuous-duty pump with over 300 cfm of vacuum. It features auto-lubed front bearings, an auto oiler, diesel flush port, and an external oil tank for easy viewing of oil levels. 866/872-1224; www.varcopumper.com; Booth #5150.
Truck Accessories
AlturnaMATS
Ground protection mats from AlturnaMATS protect turf/subsurface, while providing access for heavy equipment without a risk of getting stuck. They are sold throughout the world, to a wide variety of industries, and provide a fast, effective way to build a temporary road that is durable enough to withstand the weight of very heavy equipment. They offer a cost-effective way for construction and septic companies to quickly prepare a site, complete the work and move onto the next project. They have a load rating of 120 tons. 888/544-6287; www.alturnamats.com; Booth #6229.
Banjo Corp.
The VSFMT220SS 2-inch NPT stubby valve from Banjo Corp. features a 2-inch full port male adapter, 100 percent polytetrafluoroethylene ball seats, a compact design, Teflon TFE seals with no elastomers and a maximum pressure of 1,000 psi. 765/362-7367; www.banjocorp.com; Booth #1325.
Dynamic Filtration Limited
ME-68K5-MC vacuum truck filters from Dynamic Filtration Limited are specifically developed to remove atmospheric dust from the air intake, protecting the blower from damaging particles. Features include metal end caps for extended durability and vulcanized two-part urethane end seals to provide a positive seal. Each unit comes with standard 10-micron polyester filter media, with additional media available upon request. They are ideal for use in general site clean up and hydroexcavation. 800/265-4544; www.dynamicfiltration.ca; Booth #6062.
Green Leaf Inc.
GatorLock Couplings from Green Leaf Inc. allow for the quick connect and disconnect of tanks, pumps, transfer lines and more. The locking mechanism reduces the possibility of unintentionally opening the cam levers, which could result in personal injury and costly spills. Polypropylene couplings are highly resistant to chemical solvents and environmental stress. The line includes 1/2- through 3-inch locking cams, as well as 1/2- through 4-inch nonlocking in Series A-F. The maximum operating pressures are 90 to 125 psi at 70 degrees F. 800/654-9808; www.green-leaf.us; Booth #1238.
Logan Clutch Corporation
The self-adjusting Bell Housing PTO Clutch from Logan Clutch Corporation is ideal for use in industrial waterblasting and vacuum excavation equipment. It replaces mechanical, hand lever-engaged PTOs with a fluid or air-actuated unit. Clutch engagement is smooth and consistent, eliminating the need for mechanical linkage, lever arms and yokes. Also, since it’s air or fluid activated, the clutch can be engaged with the push of a button from the control panel or cab. They are available with or without pilot bearings, for diesel and gas engines in the 60 to 1,600 hp range. 440/808-4258; www.loganclutch.com; Booth #1464.
Muncie Power Products Inc.
The CS24 from Muncie Power Products Inc. is a clutch shift PTO designed for Allison World and Caterpillar automatic transmissions. It is engaged by means of a solenoid-activated, wet clutch pack. The engagement solenoid is built into the PTO, and installation is simplified by the requirement of only one hose connection. It features four remote-mount output shaft options, rotatable direct mount flanges, is compatible with PTO shaft extensions, and includes the Muncie output shaft brake. 800/367-7867; www.munciepower.com; Booth #2010.
STAC Inc.
Mobile hydraulic drive systems from STAC Inc. eliminate the need to use the drive shaft of the vac truck to power a blower or vacuum pump, which can sometimes be difficult due to tight space and angles. Benefits of a hydraulic system include safety, longevity, reduced downtime, added value and reduced maintenance. 800/334-7699; www.thermaflow.com; Booths #2457, #2458.
SVE Portable Roadway Systems Inc.
TRAKMATs from SVE Portable Roadway Systems Inc. are lightweight full-size ground protection mats. Its “Power Cylinder” surface creates superior traction, while allowing the mats to slide apart smoothly for easy loading/unloading. Hand cutouts are standard for safe lifting. Mats are available in Utility Black or Cool Green to prevent burnt grass. They come in several sizes to help work smarter and save money by reducing weather delays and protecting customer’s property from damage. 800/762-8267; www.mudtraks.com; Booth #6316.
Western Mule Cranes
Fold-A-Way Bumper Cranes from Western Mule Cranes allow the handling of heavy loads to become a one-person operation, completing the job faster and safer. It serves as a crane, bumper, hitch and winch. An optional MAN-LIFT attachment is available, which meets/exceeds OSHA and ANSI standards for confined-space rescue. With 15 models available and lifting capacities ranging from 750 to 2,500 pounds, a bumper crane is available to fit any application. The crane folds away into the bumper for convenient storage and easily folds out in seconds. 800/288-6853; www.westernmule.com; Booth #4339.
Hose, Reels, Accessories
Atlanta Rubber & Hydraulics Inc.
Green and Black hose assemblies from Atlanta Rubber & Hydraulics Inc. are constructed with Kanaflex 300 EPDM all-weather hose. They are ideal for anyone working in the septic pumping industry. Custom assemblies are available in any size or length, and with any fittings needed by customers. Each fitting is attached with two bands. High-quality Kuriyama and Dixon fittings ranging from aluminum and stainless steel to polypropylene and nylon are mainly used. Assemblies are typically made with quick couplings, but other fittings are available upon request. 800/282-6272; www.atlantarubber.com; Booth #2442.
Hannay Reels
The 1000 Series from Hannay Reels is a compact manual-rewind reel. Applications include high-pressure washdown and sanitizing. It is designed to handle single 1/4-, 3/8-, or 1/2-inch I.D. hose. It is lightweight, yet durable and has an e-coated frame for extra protection in demanding environments. A direct-crank rewind is permanently attached, and its exterior mounting holes enable easier installation. It features a redesigned pin lock and a standard adjustable cam-lock brake. It handles pressures to 3,000 psi and temperatures from 20 to more than 400 degrees F. 877/467-3357; www.hannay.com; Booth #5027.
Kuriyama of America Inc.
Tigerflex Amphibian AMPH Series hose from Kuriyama of America Inc. features a highly abrasion- and oil-resistant polyurethane inner liner that better resists internal wear than rubber hoses, especially in the bends where the material hits, leading to less costly downtime. It is effective vacuuming above ground in normal temperatures, or hard-to-reach areas in extreme subzero temperatures. Its highly flexible Cold Flex materials and corrugated outer cover allow for ease of use. 847/755-0360; www.kuriyama.com; Booth #3021.
Omega Liquid Waste Solutions
The Remote Control Powered Hose Reel from Omega Liquid Waste Solutions offers the ability to slash the time required to lay out and stow either 3- or 4-inch vacuum hose; what can typically take 10 to 15 minutes is achieved in seconds. It is also hinged to swing away from the back of the tank in order to facilitate rear dumping and to deploy hose in the direction of the job site. With universal mounting to any truck frame, the install is simple and secure and only requires a 12-volt connection for operation. Operators have complete control of “reel in and reel out” and “swing open and swing close” functions via a small hand-held remote with a range of 200 feet. 450/651-0444; www.exprolink.com; Booth #6167.
Piranha Hose Products
Brutus and Lil’ Brute portable hydraulic hand swagers from Piranha Hose Products can be taken anywhere to install hose ends. Lil’ Brute is designed for hose sizes 1/4, 3/8 and 1/2 inch. Brutus is designed for hose sizes 3/4, 1 and 1 1/4 inch. Both machines include a drawer that holds up to three sets of dies and pushers to provide the complete package. They are sold either as a kit with one unit, one die and one pusher, or as individual components. 800/250-5132; www.piranhahose.com; Booth #3017.
Pressure Lift
The Power Booster from Pressure Lift, available in 3-, 4- and 6-inch models, provides increased vertical lift and long-hose capability, while shortening project time and cutting maintenance cost in any pumping application. Powered by compressed air or water, the booster handles a range of viscous liquids, from water to drilling mud to heavy municipal sludge. Made of lightweight aluminum, units are reversible, allowing for slurry suspension, potholing or breaking up crusty sludge. 972/355-0550; www.pressurelift.com; Booth #5116.
Dewatering
AQUA-Zyme Disposal Systems Inc.
The Roll-off Dewatering Unit from AQUA-Zyme Disposal Systems Inc. can reduce liquid sludge volume with reductions in BOD, COD, FOG and TSS. Solids can be landfill-ready in 24 hours. Units are mobile and can be transported with a standard roll-off truck. The unit is watertight; has a 1/4-inch steel floor plate and seven-gauge sides; filter media on sides, floor and center partition includes five-year warranty; roll-over tarp; quick connect fittings; dual inlet ports; multiple drain ports with caps; and a lifespan of 12 to 14 years. Standard sizes of 15 and 30 cubic yards are in stock, with custom sizes available upon request. 979/245-5656; www.aqua-zyme.com; Booth #2091.
Bright Technologies
The 1.7-meter, trailer-mounted belt filter press unit from Bright Technologies features an insulated control room for operator comfort and security. The control room offers insulated FRP walls, air conditioning, electric heat, a refrigerator, stainless steel desk, tool storage, locker, closed circuit TV and remote operator controls. The modular design allows the room to be custom manufactured to fit most single-drop trailers. Units are made for rapid setup, with folding conveyor and operator walkways. No special lifting equipment is required. 800/253-0532; www.brightbeltpress.com; Booths #4223, #4224.
Downey Ridge Environmental
The SM BG 10,000 Series GREASEZILLA from Downey Ridge Environmental comes preassembled, allowing for quicker onsite installation and startup. It processes concentrated raw trap waste into a marketable commodity – a clean product that features moisture content of less than 1 percent. Its hydronic heating system burns brown grease, the petroleum-free, green, renewable biofuel it produces. The system can be accompanied by two 10,000-gallon double-walled process tanks built with a 3-inch interstice filled with a poured insulation, resulting in efficient heating and code compliance. The control panel requires 120-volt power. 304/658-4778; www.greasezilla.com; Booth #6519.
Flo Trend Systems Inc.
Sludge Mate container filters from Flo Trend Systems Inc. can dewater a variety of sludge and waste such as alum, ferric, lagoon and digested sludge, septic tank, grease-trap, and slaughterhouse waste, wastewater residual and sump bottoms. The closed-system design provides total odor control, no spillage, reduced maintenance and weather independence. They have 10-gauge reinforced walls and a seven-gauge carbon steel floor. Options include peaked roofs with gasketed bolted-down access hatches, drainage ports, inlet manifolds, floor filters and side-to-side rolling tarps. They dewater onsite; are available as roll-offs, trailer and tipping-stand mounted; and range in size from 5 to 40 cubic yards. 713/699-0152; www.flotrend.com; Booth #6134.
In The Round Dewatering
The horizontal sludge dewatering device from In The Round Dewatering features a stainless steel drum with perforated plastic tile lining, and is mounted on a roll-off frame for easy transportation and unloading. A typical batch of 18,000 to 25,000 gallons of sludge is mixed with polymer before being filtered in the drum during rotation. It is driven by a 1/4 hp variable-speed electric motor with a heavy-duty chain and sprocket. Turning action eliminates crusting and wet pockets, producing uniform results. The dewatered material dumps easily and the drum is self-cleaning. The sludge is released of all the liquids and is ready for disposal in just one night. 317/539-7304; www.itrdewatering.com; Booths #2360, #2361.
RecoverE LLC
The ESep trap grease separation system from RecoverE LLC accepts grease as pumped from the interceptor and separates it from water and most solids with an energy-efficient, two-stage process without additives. After separation, the brown grease is recovered as a pasteurized, low-water biosolid, which has market value as a bioenergy or chemical resource, while the grease-free water and solids can be disposed of easily. It operates as a closed system, simplifying odor management. In a typical installation, the automated and instrumented system can reduce up to six 5,000-gallon truckloads of as-pumped grease daily to about 1,200 to 3,000 gallons of solid, separated grease. 269/370-3165; www.recovere.biz; Booth #1323.
Schwing Bioset
The Bioset Process from Schwing Bioset achieves Class A biosolids via the time versus temperature equation and pH adjustment per the EPA 503 regulations. Operating costs have been reduced due to PFRP approval allowing for process operation at 55C for 40 minutes. From startup to shutdown the process remains easy to operate and reliable. A completely enclosed system allows for the prevention of spilling and an odor free operation. 715/247-3433; www.betterreuse.com; Booth #1043.
Safety
BW Technologies by Honeywell
The GasAlertMax XT II multi-gas detector from BW Technologies by Honeywell features IntelliFlash, the flashing LED compliance indicator that indicates whether the gas monitor is functioning correctly. Workers feel safer and incidents are minimized. That means savings realized from business continuity and productivity. It is compatible with the MicroDock II automated testing/calibration/docking station for intelligent fleet maintenance and simplified recordkeeping. 888/749-8878; www.gasmonitors.com; Booth #4138.
Milwaukee Rubber Products
The GasAlertQuattro gas detector from Milwaukee Rubber Products features one-button operation. The graphic LCD displays information icons, including bump test and calibration status for on-site auditing. IntelliFlash provides continuous visual confirmation of detector operation and compliance. The unit is compatible with BW Technologies by Honeywell’s MicroDock II automatic test and calibration system. 800/325-3730; www.milwaukeerubber.com; Booth #3032.
Pronal-USA Inc.
The SMARTSHORE shoring system from Pronal-USA Inc. is PE certified to be in compliance with OSHA Standard 29 CFR part 1926, subpart P. It is approved for type A, B and C60 soils at depths up to 6.5 feet. It is easy to handle, as it only weighs 28 pounds, and made of tough material resistant to puncture. Its design allows two people to set up a trench box in under 10 minutes. It requires minimum storage space, and is flexible and adaptable to most types of excavations. 386/310-1558; www.pronal-usa.com; Booth #1210.
RKI Instruments Inc.
The lightweight GX-2009 personal confined-space gas monitor from RKI Instruments Inc. weighs only 4.6 ounces, and monitors combustibles, oxygen, hydrogen sulfide, and carbon monoxide using individual sensors for each gas. All four gas readings are displayed on an LCD display that has auto backlighting. Gas alarms are adjustable, and alarm types include a 95 dB audible alarm with dual speakers, vibration alarm and bright visual alarms on three sides of the instrument. It is also waterproof and dustproof with an IP-67 rating. Also included is a large-capacity data logger. 800/754-5165; www.rkiinstruments.com; Booth #2062.
Safety Corporation of America
The corrugated aluminum ultraSHORE trench shoring system from Safety Corporation of America features stackable panels that can be used horizontally or vertically for bury depths to 12 feet in Class C soils. Extra features include leg and wheel kits for OSHA regulations. Easily transported in a pickup, the system can be closed off on one or both ends with quick-release, spring-loaded end-closure panels. 800/746-7464; www.shoring.com; Booth #5005.
Safety Sewer Drain
The Safety Sewer Drain eliminates the mess and threat of contamination when removing the clean-out on a plugged drain. Made of clear polypropylene, the device fits over a 4-inch clean-out. Sewage drains through a valve-controlled hose into a bucket for disposal. It also can be adapted to work on a 3-inch clean-out. 906/753-4002; www.safetysewerdrain.com; Booth #4116.
Management Software, Office Technology, Education
GPS North America
Smart Antenna vehicle tracking hardware from GPS North America is a tamper-proof and scalable device providing standard GPS tracking. It can also interface with third-party hardware for job dispatch, navigation and electronic driver logs. The company also specializes in the development and support of paperless forms for hand-held, mobile data collection, and enables companies to control fuel and labor costs by locating and monitoring fleets and assets through their SignalTrack Web portal. 888/760-4477; www.gpsnorthamerica.com; Booth #5415.
Infrastructure Technologies
The ITpipes Sync from Infrastructure Technologies is effective for organizing CCTV inspection reporting, as it automatically transfers new field inspections from the truck into a selected project, managing data, reports and media. Work can be uploaded via broadband throughout the day, and inspections automatically go into their designated project. Operators have up-to-date project information and billing, can plan for the next schedule and send out emergency crews as needed. 877/487-4737; www.itpipes.com; Booth #2473.
InSight Mobile Data Inc.
StreetEagle Mobile Barcoding from InSight Mobile Data Inc. equips field workers with not only asset locations on a map, but also barcode technology to enable them to scan any asset to communicate activity and inventory data. For operations that depend on utility vehicles, equipment and other mobile assets to get their work done, keeping track of their location, status and usage history is critical for maximizing efficiency. 301/866-1990; www.insightmobiledata.com; Booth #2341.
NASSCO Inc.
The ITCP (Inspector Training Certification Program) is NASSCO’s standard national training and certification program that provides comprehensive education and tools for professionals to better understand and inspect trenchless infrastructure renewal technologies. In addition to CIPP technology courses, a certification program for manhole rehabilitation technologies is offered, and will soon include pipe bursting. 410/442-7473; www.nassco.org; Booth #1086.
Pipeline Analytics
WinCan VX from Pipeline Analytics emphasizes a productivity-oriented, fully customizable user interface with cloud-based data access and enhanced reporting and analytical capabilities. It also offers support for value-added processes like pipe cleaning, rehabilitation and leak detection. Beyond that, it augments existing functional areas like GIS, laser/sonar scanning, side scanning, image measurement and municipal database integration. To accommodate even the largest municipalities, it has been performance benchmarked on databases exceeding 5 million records. 877/626-8386; www.pipelineanalytics.com; Booth #6046.
Standard Equipment Company
The Custom Rebuilt line of sewer cleaning, maintenance and televising equipment from Standard Equipment Company offers a choice of rebuilt combination sewer cleaners, trailer- and truck-mounted jetters, catch basin cleaners, hydroexcavators and sewer televising equipment. The company starts by selecting high-quality units available for rebuild, and then processes them through a consistent evaluation system, using OEM trained technicians. All aspects of a machine are evaluated and rebuilt if necessary, including body and chassis components. The company inventories a wide variety of equipment to meet all operational needs and budget constraints. 800/633-2997; www.standardequipment.com; Booths #2355, #2356.
Trade-Serve
The Trade-Serve system allows technicians to make a professional and consistent presentation of bundles and options to customers in just under a minute. In addition to eliminating paper in the field, service managers have the ability to coach every call from the office, owners control margins with the click of a button, and warehouse managers monitor inventory quickly and efficiently. It takes ordinary and familiar business models and makes them easy to use and relevant to technological advances. 636/222-2222; www.trade-serve.com; Booth #5354.
US Fleet Tracking
The AT-X5 live GPS tracking device from US Fleet Tracking is compact, discreet and easy to install. It assures turn-by-turn monitoring of mobile assets, and features 5- and 10-second tracking, historical playback and virtual fences. It comes standard with weather overlay and traffic features for safety and efficiency, plus the ability to create and edit up to 20 different logs while in the field. The Web-based system is compatible with every mobile platform. 405/749-1105; www.usft.com; Booth #5452.
Vactor Manufacturing
The VactorTRAK data collection system from Vactor Manufacturing monitors and reviews sewer cleaning operations on Vactor 2100 Plus combination sewer cleaners equipped with the system. It collects and transmits comprehensive, operational intelligence to a secure, hosted website where the public utility or contractor is able to access information 24/7 from any internet-connected device. It can track key data, including hours of operation, water consumption, distances of lines cleaned, vacuum utilization and fuel consumption. It allows the manager to view statistics for each unit or the entire fleet over a given time period. 800/627-3171; www.vactor.com; Booth #5038.
Locating Systems
General Pipe Cleaners
The Gen-Eye Hot Spot pipe locator from General Pipe Cleaners features a field antenna array and on-screen icons that lead operators right to the target, without a long learning curve. The easy-to-see auto backlit LCD display features arrows that point operators in the right direction. The null icon indicates the pipe location and the camera icon confirms the target. Circle the energized pipe or tracer wire until the utility icon appears on the screen to find utility lines. Rated at IP65, it’s dust and dirt proof, water resistant, and passed the one-meter drop test, and the screen passed the 18-inch steel ball drop test. 800/245-6200; www.drainbrain.com; Booth #6412.
Sensors & Software Inc.
The LMX100 utility line locator from Sensors & Software Inc. locates metallic, plastic or concrete utilities. It can detect utilities with broken tracer wires, discover undocumented utilities, and find unexpected obstacles. It’s ideal for outfitting fleets, as it’s tailored for the locate-and-mark needs of utility locating contractors. 800/267-6013; www.gprlocates.com; Booth #6166.
SubSurface Instruments
The AML (All Material Locator) from SubSurface Instruments is a highly sensitive instrument that utilizes advanced, ultra-high frequency radio waves to locate buried PVC pipes. It also locates nearly any subsurface material with an edge, including plastic, metal, wood, cable and concrete. It will function in clay, wet soil, snow or standing water without the need for a separate transmitter and receiver, wires, clips or clamps. It was designed specifically for use in the utility, water, gas, construction and cable industries. 855/422-6346; www.ssilocators.com; Booth #1305.