The QuickLock Flex Sleeve from RauschUSA can be used to correct offsets and/or axial bending inside 8- to 24-inch pipe. Using a corrugated steel connection, which is fused between two 316L stainless steel sleeves, it can be installed over an offset joint to rehabilitate the pipe. The new design maintains the EPDM rubber gasket seal that is mechanically compressed against the inner pipe wall and permanently locked in place by two locking gear mechanisms in the sleeve. It meets ASTM Standard F3110-14 and is NSF61 certified for use in potable water. Applications include repairing leaking or offset joints, fixing cracks and holes, preventing root intrusion, and closing unused laterals. No chemicals or resins are used, so there is no cure time, and point repairs may be installed with flow. 717-709-1005; www.rauschusa.com.